In most Business’s the Lighting is using 40 – 50% of the energy. Even a heavy engineering plant such as a steel tower manufacturer shown below, it can be clearly seen that the biggest load is the lighting. Overall savings on your business could well be up to 40%.
By using the most efficient LED Lighting Units some Business and Institutions have made almost an 80% Energy Saving. Often repositioning of lights can effectively reduce the overall number of units. With the additional use of occupancy microwave sensors, automatically switching lights off in unoccupied areas can have a dramatic effect on energy reduction with little additional cost.
For example the small parts store at Newcross Depot run by Bombardier we installed 35 panels below the Mezzanine and with just two microwave occupancy sensors through a relay we were able to switch them all off when the stores were not occupied. In most Commercial lighting applications there are areas which are unoccupied much of the time such as toilets, stores, restrooms, corridors etc.
Everything starts with an initial Survey, there’s normally no charge for this service. Alternatively for a new building or a refurb we can work from your plans.
Example of what you can save
Your Existing Light Fitting |
Load in Watts |
Replacement |
Saving |
---|---|---|---|
600×600 Quad 18w T8 Fluorescent Panel |
82 |
LED Panel 40w 4000 Lumen (Typical 20% reduction in panels) |
61% |
T8 6’ 70w Twin Fluorescent |
161 |
LED Epistar 40w 5000 Lumen Batten |
76% |
Metal Halide 250w High Bay |
292 |
LED 150w High Bay Disc 23,500 Lumen (Typical reduction of units by 30%) |
67% |
Metal Halide 400w High Bay |
459 |
LED 150w High Bay Tube 23,500 Lumen |
68% |
Please call for more comparisons if your lights are not listed on free phone 0333 446084